Your water heater is one rather used and more expensive appliances in your home, and consumes a large associated with your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving from the home heating and costs.
Regular flushing of the water heater are probably the single most important step you can take to prolong its service life and even save energy. In a period of time, sediments enhance in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. Partly destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most regarding the country, the common water heater lasts 3-5 years. Regularly flushing your water heater can double existence of your hot water heater from 3-5 to 7-10 years. Are investigating costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater is a must in today’s economy. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs in half. Depending on the volume of hot water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.
To drain your water heater, first you should set the thermostat to pilot (if it is a gas water heater) or turn the circuit breaker off (if it is electric heater). Failure to do so could result in overheating and severe damage to the water heater. Next, close the water supply valve located on the water inlet line going into your water heater. You may then connect a garden hose to the drain valve located towards the bottom of the heater. Open the drain and allow it to play until all of the water has emptied from the unit. Then close the drain. Open the water supply valve and refill the heater tank. You should also open a hot water faucet somewhere indoors and stand there and watch it run for several minutes until the water flows out perfectly. This will allow air to vent because of the heater and the hot water lines. Finally, you can turn the thermostat to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your residence to filter or condition the water so may be less corrosive to your plumbing system, particularly in areas which have hard stream. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in your neighborhood to discuss options and merchandise to provide what you need.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610